Chemical content PESD1CAN

Nexperia is committed to being a proactive and sustainable company, which is why chemical content information for our semiconductor products is publicly available from our website. This data serves our customers with the relevant information to assess compliance with national and international legal standards, including EU/CN RoHS, REACH, and California Proposition 65. With this detailed level of data directly retrieved from our product database, Nexperia is sticking to the highest standards in semiconductor industry. Further information is available under Environment.

12NC	OPN	Type No.	Package	State	MSL
934059097215	PESD1CAN,215	PESD1CAN	SOT23 (TO-236AB)	RFS	1
934059097235	PESD1CANVL	PESD1CAN	SOT23 (TO-236AB)	RFS	1

REACH	Compliant with Regulation 1907/2006/EC (REACH). Does not contain REACH SVHC substances exceeding 1000 ppm of the article.
EU RoHS	Compliant with Directive 2011/65/EU, amended by Directive 2015/863/EU, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ('RoHS 2 amended') without exemptions.
CN RoHS	Compliant with Chinese Administration on the Control of Pollution Caused by Electronic Information Products (ACPEIP; CN RoHS).
ELV	Compliant with Directive 2000/53/EC, amended by Directive 2023/533, on end of life vehicles (ELV) without exemptions.
PFAS	Does not contain any intentionally added per- and polyfluoroalkyl substances (PFAS).
CA Proposition 65	Contains California Proposition 65 substance(s) [at the article level]: substance 7440-02-0: 117446 ppm; substance 7440-48-4: 1397 ppm; substance 1333-86-4: 310 ppm; substance 7439-92-1: 1 ppm;
IEC 62474	Contains IEC 62474 substance(s) [at the article level]: substance 7440-02-0: 117446 ppm; substance 7440-48-4: 1397 ppm; substance 1333-86-4: 310 ppm; substance 7439-92-1: 1 ppm;
Precious Metals	Contains precious metals [Ag, Au, Pd, Pt; at the article level]: substance 7440-22-4: 8352 ppm;
RHF Indicator	Lead-free and halogen-free according to Nexperia's halogen-free definition.

Material	Material Group	Substance	CAS No.	Mass (mg)	Material (%)	Product (%)
Die	Doped silicon	Silicon (Si)	7440-21-3	0.216000	100.000000	2.753821
		Die Total		0.216000	100.000000	2.753821

Lead Frame	Iron-nickel alloy	Iron (Fe)	7439-89-6	1.223010	47.980000	15.592369
Lead Frame	Iron-nickel alloy	Nickel (Ni)	7440-02-0	0.921209	36.140000	11.744648
Lead Frame	Iron-nickel alloy	Manganese (Mn)	7439-96-5	0.021921	0.860000	0.279480
Lead Frame	Iron-nickel alloy	Cobalt (Co)	7440-48-4	0.010961	0.430000	0.139740
Lead Frame	Iron-nickel alloy	Silicon (Si)	7440-21-3	0.006627	0.260000	0.084494
Lead Frame	Iron-nickel alloy	Chromium (Cr)	7440-47-3	0.005608	0.220000	0.071495
Lead Frame	Iron-nickel alloy	Aluminium (Al)	7429-90-5	0.002294	0.090000	0.029248
Lead Frame	Iron-nickel alloy	Carbon (C)	7440-44-0	0.001020	0.040000	0.012998
Lead Frame	Iron-nickel alloy	Sulfur (S)	7704-34-9	0.000510	0.020000	0.006499
Lead Frame	Iron-nickel alloy	Phosphorus (P)	7723-14-0	0.000510	0.020000	0.006500
		Base Alloy Total		2.193670	86.060000	27.967471
Lead Frame	Pure metal layer	Copper (Cu)	7440-50-8	0.289821	11.370000	3.694982
		Pre-Plating 1 Total		0.289821	11.370000	3.694982
Lead Frame	Pure metal layer	Silver (Ag)	7440-22-4	0.065509	2.570000	0.835189
		Pre-Plating 2 Total		0.065509	2.570000	0.835189
		Lead Frame Total		2.549000	100.000000	32.497642

Mould Compound	Filler	Silica	7631-86-9	3.512880	72.000000	44.786316
Mould Compound	Polymer	o-Cresol-epichlorohydrin-formaldehyde copolymer	29690-82-2	0.731850	15.000000	9.330482
Mould Compound	Polymer	Formaldehyde-phenol copolymer	9003-35-4	0.487900	10.000000	6.220321
Mould Compound	Additive	Non-declarable		0.141492	2.900000	1.803892
Mould Compound	Pigment	Carbon black	1333-86-4	0.002439	0.050000	0.031102
Mould Compound	Additive	Triphenylphosphine	603-35-0	0.002439	0.050000	0.031102
		Mould Compound Total		4.879000	100.000000	62.203215

Post-Plating	Tin solder	Tin (Sn)	7440-31-5	0.184981	99.990000	2.358361
Post-Plating	Impurity	Lead (Pb)	7439-92-1	0.000009	0.005000	0.000117
Post-Plating	Impurity	Antimony (Sb)	7440-36-0	0.000006	0.003000	0.000071
Post-Plating	Impurity	Copper (Cu)	7440-50-8	0.000002	0.001000	0.000024
Post-Plating	Impurity	Bismuth (Bi)	7440-69-9	0.000002	0.001000	0.000024
		Post-Plating Total		0.185000	100.000000	2.358597

Wire	Pure metal	Copper (Cu)	7440-50-8	0.014645	99.990000	0.186705
Wire	Impurity	Non-declarable		0.000001	0.010000	0.000020
		Wire Total		0.014646	100.000000	0.186725

		PESD1CAN Total		7.843646	100.000000	100.000000

Notes
Report created on 2024-12-21 22:23:32 CET+0100

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Pb-free Soldering		Pb Soldering		No. of Processing Cycles
PPT	MPPT	PPT	MPPT	No. of Processing Cycles
260 °C	40 s	235 °C	30 s	3

Notes
Report created on 2024-12-21 22:23:32 CET+0100

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

部件名称 Material	有毒或有害物质和元素 (Toxic or hazardous substances and elements)
部件名称 Material	铅 (Pb)	镉 (Cd)	汞 (Hg)	六价铬 (Cr⁶⁺)	多溴联苯 (PBB)	多溴二苯醚 (PBDE)
半导体芯片 (Die)	◯	◯	◯	◯	◯	◯
基底合金 (Base Alloy)	◯	◯	◯	◯	◯	◯
预镀层1 (Pre-Plating 1)	◯	◯	◯	◯	◯	◯
预镀层2 (Pre-Plating 2)	◯	◯	◯	◯	◯	◯
模封料 (Mould Compound)	◯	◯	◯	◯	◯	◯
后镀层 (Post-Plating)	◯	◯	◯	◯	◯	◯
导线 (Wire)	◯	◯	◯	◯	◯	◯

◯	表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下 Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
✕	表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求 Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.
	该半导体产品具有无限期的环保使用期限（EFUP）。 This semiconductor product has an indefinite environmental friendly use period (EFUP).

Notes
Report created on 2024-12-21 22:23:32 CET+0100

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

Restricted substances declaration

The many processes used to manufacture semiconductors are complex and delicate, and require a variety of specialized chemicals and materials. To protect our employees and the environment, we have several programs in place that regulate our use of hazardous chemicals or "substances of concern". In fact, we follow some of the toughest practical standards in the industry.

We carefully monitor our use of substances categorized as restricted, hazardous, or relevant, and have committed, as part of our near-term Sustainability Program, to achieving a 100% reduction of all restricted and hazardous substances that aren’t critical use. We track our usage of chemicals in our company-wide Chemical Management program, which registers and classifies the chemical substances we handle. Any use or emission of restricted or hazardous substances must be covered by internal dispensation, so we are searching for alternatives as quickly as possible.

The Nexperia List of Hazardous Substances in Products and Packaging specifies substances that are not permitted in materials, parts, semi-finished goods and products at levels above our established threshold to ensure that no Nexperia products put on the market contain any substances that are restricted by law or other regulations, including the European Union’s Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (commonly known as RoHS).

While most substances on this list are not permitted by law, a number of them are not permitted by Nexperia in view of upcoming legislation, their impact on the environment or on health & safety.

The Nexperia List of Hazardous Substances in Products and Packaging also contains a number of Restricted Substances. Use of these substances is allowed, but any use of these substances must be reported above the declaration threshold as specified in this list. Most substances are placed on this list because of health risks in their use and/or processing. Others are placed on this list because they limit recycling, because they are scarce or they have for instance a high environmental impact in mining.

All products

Bipolar transistors

Diodes

ESD protection, TVS, signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive

All applications

Automotive

Industrial and Power

Mobile and Wearables

Computing and Consumer

Sub-systems: Power conversion topologies

Sub-systems: General

Reference designs

Evaluation boards

Interactive application notes

Advanced Support Tools

Chemical content PESD1CAN

Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

Chemical content PESD1CAN