Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

IP4283CZ10-TT

This product has been discontinued

Parametrics

Type number Package name
IP4283CZ10-TT TSSOP10

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
IP4283CZ10-TT IP4283CZ10-TT,118
(934063216118)
Obsolete 4283 DBSN + ASID yww SOT552-1
TSSOP10
(SOT552-1)
SOT552-1 SSOP-TSSOP-VSO-WAVE
SOT552-1_118

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
IP4283CZ10-TT IP4283CZ10-TT,118 IP4283CZ10-TT rohs rhf rhf
Quality and reliability disclaimer

Documentation (7)

File name Title Type Date
IP4283CZ10_SER ESD protection for ultra high-speed interfaces Data sheet 2020-04-28
Nexperia_document_guide_MiniLogic_PicoGate_201901 PicoGate leaded logic portfolio guide Brochure 2019-01-07
SOT552-1 3D model for products with SOT552-1 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP10_SOT552_mk plastic, thin shrink small outline package; 10 leads; 0.5 mm pitch; 3 mm x 3 mm x 1.1 mm body Marcom graphics 2017-01-28
SOT552-1 plastic, thin shrink small outline package; 10 leads; 0.5 mm pitch; 3 mm x 3 mm x 1.1 mm body Package information 2022-06-07
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
SOT552-1 3D model for products with SOT552-1 package Design support 2020-01-22

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.