Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

NEX13120FPC-Q100

12-channel automotive linear LED driver

NEX13120-Q100 is an AEC-Q100 Grade 1 qualified 12-channel, 40 V high-side LED driver with up to 100 mA output current per channel, PWM and analog dimming support, and MTP for configurable depending on application requirements in Automotive lighting systems.

NEX13120-Q100 supports 8-bit output current with high accuracy from channel to channel and device to device, channels can be used in parallel to support higher current output than 100 mA. The low dropout of the device helps to eliminate the heat generation of the device itself. The device integrates UART over CAN as the digital interface to enable long distance off-board communication, which is a typical scenario for Automotive exterior lighting where different lamp functions are typically located in different PCB boards. NEX13120-Q100 also supports LED open-circuit, short to ground, and single LED short-circuit diagnostics. Additionally, a configurable watchdog automatically sets the part into Fail-Safe states when the CAN bus connection is lost.

NEX13120-Q100 can operate at a junction temperature range from -40 °C to +150 °C in a thermally enhanced 24-pin HTSSOP24 package.

Figure 1. Typical application

Features and benefits

  • AEC-Q100 qualified for automotive applications

    • Specified from-40 °C to 125 °C

  • Function safety capable

    • Provide documents to support function safety design

  • 12-channel precision high-side current output:

    • Vbat: 4.5 V to 36 V and Vs: 3.8 V to 36 V

    • Up to 100 mA channel current per channel

    • 2-bit global, 6-bit independent current setting

    • Current accuracy within ±5 % from 18 mA to 100 mA

    • Low voltage drops: 600 mV at 100 mA

    • 12-bit independent PWM dimming

    • Programmable PWM frequency: 50 Hz to 23.4 kHz

    • Linear and exponential dimming method

  • Integrated UART interface:

    • Data rate up to 2 Mbit/s

    • Support UART data format

    • Support 27 slave address set by resister

  • Diagnostics and protections:

    • Programmable Fail-Safe state

    • LED open-circuit detection

    • LED short-circuit detection

    • Single-LED short-circuit diagnostic

    • Programmable low-Vs detection

    • Open-drain FLT pin for fault indication

    • Watchdog and CRC for data line

    • MTP ECC check

    • 8-bit ADC for pin voltage measurement

    • Over-temperature protection

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C2a exceeds 500 V

Applications

  • Automotive exterior rear light

  • Automotive exterior headlight

Package

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
NEX13120FPC-Q100 NEX13120FPC-Q100Y
(935692154518)
Development SOT8083-1
HTSSOP24
(SOT8083-1)
SOT8083-1 Not available

Environmental information

Type number Orderable part number Chemical content RoHS RHF-indicator
NEX13120FPC-Q100 NEX13120FPC-Q100Y NEX13120FPC-Q100 rohs rhf rhf
Quality and reliability disclaimer

Documentation (2)

File name Title Type Date
NEX13120_Q100 12 channel automotive linear LED driver Data sheet 2025-01-22
SOT8083-1 plastic, thermal enhanced thin shrink small outline package; 24 leads; 0.65 mm pitch; 7.8 mm × 4.4 mm × 1.2 mm body Package information 2025-01-10

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

No documents available

Ordering, pricing & availability

Type number Orderable part number Ordering code (12NC) Status Packing Packing Quantity Buy online

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
NEX13120FPC-Q100 NEX13120FPC-Q100Y 935692154518 SOT8083-1 Order product