Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

XS3A4053PW

Triple low-ohmic single-pole double-throw analog switch

The XS3A4053 is a triple low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A digital enable pin E is common to all switches.When E is HIGH, the switches are turned off.

Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the XS3A4053 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The XS3A4053 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

Features and benefits

  • Wide supply voltage range from 1.4 V to 4.3 V

  • Very low ON resistance (peak):

    • 1.6 Ω (typical) at VCC = 1.4 V

    • 1.0 Ω (typical) at VCC = 1.65 V

    • 0.55 Ω (typical) at VCC = 2.3 V

    • 0.5 Ω (typical) at VCC = 2.7 V

    • 0.5 Ω (typical) at VCC = 4.3 V

  • Break-before-make switching

  • High noise immunity

  • CMOS low-power consumption

  • Latch-up performance exceeds 100 mA per JESD78 Class II Level A

  • 1.8 V control logic at VCC = 3.6 V

  • Control input accepts voltages above supply voltage

  • Very low supply current, even when input is below VCC

  • High current handling capability (350 mA continuous current under 3.3 V supply)

  • ESD protection:

    • HBM ANSI/ESDA/JEDEC JS-001 class 3A exceeds 4000 V

    • CDM ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

    • IEC61000-4-2 contact discharge exceeds 8000 V for switch ports

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Applications

  • Appliances

  • Communication Systems

  • Medical Equipment

  • Analog Sensor Monitoring

  • Audio Routing/Switching

  • Test and Measurement

Parametrics

Type number Configuration VCC (V) Logic switching levels RON (Ω) RON(FLAT) (Ω) f(-3dB) (MHz) THD (%) Xtalk (dB) Power dissipation considerations Tamb (°C) Package name
XS3A4053PW SPDT-Z 1.4 - 4.3 CMOS/LVTTL 0.5 0.13 40 0.04 -90 ultra low -40~125 TSSOP16

Package

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
XS3A4053PW XS3A4053PWJ
(935691241118)
Active S3A4053 SOT403-1
TSSOP16
(SOT403-1)
SOT403-1 SSOP-TSSOP-VSO-WAVE
SOT403-1_118

Environmental information

Type number Orderable part number Chemical content RoHS RHF-indicator
XS3A4053PW XS3A4053PWJ XS3A4053PW rohs rhf rhf
Quality and reliability disclaimer

Documentation (9)

File name Title Type Date
XS3A4053 Triple low-ohmic single-pole double-throw analog switch Data sheet 2024-07-31
SOT403-1 3D model for products with SOT403-1 package Design support 2020-01-22
xs3a4053 XS3A4053 IBIS model IBIS model 2022-02-14
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP16_SOT403-1_mk plastic, thin shrink small outline package; 16 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm body Marcom graphics 2017-01-28
SOT403-1 plastic, thin shrink small outline package; 16 leads; 5 mm x 4.4 mm x 1.2 mm body Package information 2023-11-08
SOT403-1_118 TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientation Packing information 2020-04-21
XS3A4053PW_Nexperia_Product_Reliability XS3A4053PW Nexperia Product Reliability Quality document 2024-06-16
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
xs3a4053 XS3A4053 IBIS model IBIS model 2022-02-14
SOT403-1 3D model for products with SOT403-1 package Design support 2020-01-22

Ordering, pricing & availability

Type number Orderable part number Ordering code (12NC) Status Packing Packing Quantity Buy online
XS3A4053PW XS3A4053PWJ 935691241118 Active SOT403-1_118 2,500 Order product

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
XS3A4053PW XS3A4053PWJ 935691241118 SOT403-1 Order product