Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

74AHCT2G00DP-Q100

This product has been discontinued

Parametrics

Type number Package name
74AHCT2G00DP-Q100 TSSOP8

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74AHCT2G00DP-Q100 74AHCT2G00DP-Q100H
(935300197125)
Obsolete C00 Standard Procedure Standard Procedure SOT505-2
TSSOP8
(SOT505-2)
SOT505-2 SOT505-2_125

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74AHCT2G00DP-Q100 74AHCT2G00DP-Q100H 74AHCT2G00DP-Q100 rohs rhf rhf
Quality and reliability disclaimer

Documentation (7)

File name Title Type Date
74AHC_AHCT2G00_Q100 Dual 2-input NAND gate Data sheet 2023-08-31
AN11106 Pin FMEA for AHC/AHCT family Application note 2019-01-09
Nexperia_document_guide_MiniLogic_PicoGate_201901 PicoGate leaded logic portfolio guide Brochure 2019-01-07
SOT505-2 3D model for products with SOT505-2 package Design support 2019-01-18
ahct2g00 ahct2g00 IBIS model IBIS model 2013-04-08
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT505-2 plastic, thin shrink small outline package; 8 leads; 0.65 mm pitch; 3 mm x 3 mm x 1.1 mm body Package information 2022-06-03

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
ahct2g00 ahct2g00 IBIS model IBIS model 2013-04-08
SOT505-2 3D model for products with SOT505-2 package Design support 2019-01-18

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.