Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

74ALVC162834ADGG

18-bit registered driver with inverted register enable and 30 Ohm termination resistors; 3-state

The 74ALVC162834A is an 18-bit registered driver. Data flow is controlled by active low output enable (OE), active low latch enable (LE) and clock inputs (CP).

When LE is LOW, the A to Y data flow is transparent. When LE is HIGH and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A-data is stored in the latch/flip-flop.

The 74ALVC162834A is designed with 30 Ω series resistors in both HIGH or LOW output stages.

When OE is LOW the outputs are active. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latch/flip‑flop.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This product has been discontinued

Features and benefits

  • Wide supply voltage range of 1.2 V to 3.6 V
  • Complies with JEDEC standard no. 8-1A
  • CMOS low power consumption
  • Direct interface with TTL levels
  • Current drive ±12 mA at 3.0 V
  • MULTIBYTE™ flow-through standard pin-out architecture
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce
  • Output drive capability 50 Ω transmission lines at 85 °C
  • Integrated 30 Ω termination resistors
  • Diode clamps to VCC and GND on all inputs
  • Input diodes to accommodate strong drivers

Applications

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVC162834ADGG 74ALVC162834ADGG,1
(935267297112)
Obsolete no package information
74ALVC162834ADGG:1
(935267297118)
Obsolete

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVC162834ADGG 74ALVC162834ADGG,1 74ALVC162834ADGG rohs rhf rhf
74ALVC162834ADGG 74ALVC162834ADGG:1 74ALVC162834ADGG rohs rhf rhf
Quality and reliability disclaimer

Documentation (2)

File name Title Type Date
74ALVC162834A 18-bit registered driver with inverted register enable and 30 Ohm termination resistors; 3-state Data sheet 2017-06-14
alv2834a alv2834a IBIS model IBIS model 2013-04-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
alv2834a alv2834a IBIS model IBIS model 2013-04-08

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.