Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

74LVC4245AD

Octal dual supply translating transceiver; 3-state

The 74LVC4245A is an octal dual supply translating transceiver featuring 3-state bus compatible outputs in both send and receive directions. It is designed to interface between a 3 V and 5 V bus in a mixed 3 V and 5 V supply environment. The device features an output enable input (OE) and a send/receive input (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state, effectively isolating the buses. In suspend mode, when either supply is zero, there is no current path between supplies. VCCA ≥ VCCB, except in suspend mode. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This product has been discontinued

Features and benefits

  • 5 V tolerant inputs/outputs, for interfacing with 5 V logic

  • Wide supply voltage range:

    • 3 V bus (VCC(B)): 1.5 V to 3.6 V

    • 5 V bus (VCC(A)): 1.5 V to 5.5 V

  • CMOS low-power consumption

  • TTL interface capability at 3.3 V

  • Overvoltage tolerant control inputs to 5.5 V

  • High-impedance when VCC(A) = 0 V

  • Complies with JEDEC standard no. JESD8B/JESD36

  • Latch-up performance meets requirements of JESD78 Class 1

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Multiple package options

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type number Package name
74LVC4245AD SO24

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74LVC4245AD 74LVC4245AD,118
(935260749118)
Discontinued / End-of-life 74LVC4245AD SOT137-1
SO24
(SOT137-1)
SOT137-1 SO-SOJ-WAVE
WAVE_BG-BD-1
SOT137-1_118
74LVC4245AD,112
(935260749112)
Obsolete 74LVC4245AD Not available

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74LVC4245AD 74LVC4245AD,118 74LVC4245AD rohs rhf rhf
74LVC4245AD 74LVC4245AD,112 74LVC4245AD rohs rhf rhf
Quality and reliability disclaimer

Documentation (12)

File name Title Type Date
74LVC4245A Octal dual supply translating transceiver; 3-state Data sheet 2023-09-01
AN11009 Pin FMEA for LVC family Application note 2019-01-09
AN263 Power considerations when using CMOS and BiCMOS logic devices Application note 2023-02-07
Nexperia_document_guide_Logic_translators Nexperia Logic Translators Brochure 2021-04-12
SOT137-1 3D model for products with SOT137-1 package Design support 2020-01-22
lvc4245a lvc4245a IBIS model IBIS model 2013-04-09
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT137-1 plastic, small outline package; 24 leads; 1.27 mm pitch; 15.4 mm x 7.5 mm x 2.65 mm body Package information 2022-06-21
74LVC4245AD_Nexperia_Product_Reliability 74LVC4245AD Nexperia Product Reliability Quality document 2022-05-04
lvc lvc Spice model SPICE model 2013-05-07
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
lvc4245a lvc4245a IBIS model IBIS model 2013-04-09
lvc lvc Spice model SPICE model 2013-05-07
SOT137-1 3D model for products with SOT137-1 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.