Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

PDI1284P11DL

3.3 V parallel interface transceiver/buffer

The PDI1284P11 parallel interface chip is designed to provide an asynchronous, 8-bit, bidirectional, parallel interface for personal computers. The PDI1284P11 includes all 19 signal lines defined by the IEEE 1284 interface specification for Byte, Nibble, EPP, and ECP modes. The PDI1284P11 is designed for hosts or peripherals operating at 3.3 V to interface 3.3 V or 5.0 V devices.

The eight transceiver pairs (A/B 1 to 8) allow data transmission from the A-bus to the B-bus, or from the B-bus to the A-bus, depending on the state of the direction pin DIR.

The B-bus and the Y9 to Y13 lines have either totem pole or resistor pull-up outputs, depending on the state of the high drive enable pin HD. The A-bus has only totem pole style outputs. All inputs are TTL compatible with at least 400 mV of input hysteresis at VCC = 3.3 V.

This product has been discontinued

Features and benefits

  • Asynchronous operation

  • 8-bit transceivers

  • Six additional buffer/driver lines peripheral to cable

  • Five additional control lines from cable

  • 5 V tolerant

  • ESD protection:

    • HBM JESD22-A114E exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Latch-up current protection exceeds 500 mA per JEDEC Std 19

  • Input hysteresis

  • Low-noise operation

  • IEEE 1284 compliant level 1 and 2

  • Overvoltage protection on B/Y side for off-state

  • A side 3-state option

  • B side active or resistive pull-up option

  • Cable side supply voltage for 5 V or 3 V operation

Parametrics

Type number Package name
PDI1284P11DL SSOP48

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
PDI1284P11DL PDI1284P11DL,112
(935223090112)		 Obsolete PDI1284P11DL SOT370-1
SSOP48
(SOT370-1) 		SOT370-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
PDI1284P11DL,118
(935223090118)		 Obsolete PDI1284P11DL SOT370-1_118

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
PDI1284P11DL PDI1284P11DL,112 PDI1284P11DL rohs rhf rhf
PDI1284P11DL PDI1284P11DL,118 PDI1284P11DL rohs rhf rhf
Quality and reliability disclaimer

Series

Documentation (6)

File name Title Type Date
PDI1284P11 3.3 V parallel interface transceiver/buffer Data sheet 2021-07-06
AN263 Power considerations when using CMOS and BiCMOS logic devices Application note 2023-02-07
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT370-1 plastic, shrink small outline package; 48 leads; 0.635 mm pitch; 15.9 mm x 7.5 mm x 2.8 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

No documents available

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet