Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

74LVC2T45GT-Q100

Dual supply translating transceiver; 3-state

The 74LVC2T45-Q100; 74LVCH2T45-Q100 are dual bit, dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two 2-bits input-output ports (nA and nB), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2 V and 5.5 V making the device suitable for translating between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR allows transmission from nB to nA.

The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state. Active bus hold circuitry in the 74LVCH2T45-Q100 holds unused or floating data inputs at a valid logic level.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Wide supply voltage range:

    • VCC(A): 1.2 V to 5.5 V

    • VCC(B): 1.2 V to 5.5 V

  • High noise immunity

  • Complies with JEDEC standards:

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8C (2.7 V to 3.6 V)

    • JESD36 (4.5 V to 5.5 V)

  • Maximum data rates:

    • 420 Mbps (3.3 V to 5.0 V translation)

    • 210 Mbps (translate to 3.3 V))

    • 140 Mbps (translate to 2.5 V)

    • 75 Mbps (translate to 1.8 V)

    • 60 Mbps (translate to 1.5 V)

  • Suspend mode

  • Latch-up performance exceeds 100 mA per JESD 78 Class II

  • ±24 mA output drive (VCC = 3.0 V)

  • Inputs accept voltages up to 5.5 V

  • Low power consumption: 16 μA maximum ICC

  • IOFF circuitry provides partial Power-down mode operation

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 3A exceeds 4000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Multiple package options

Parametrics

Type number VCC(A) (V) VCC(B) (V) Logic switching levels Output drive capability (mA) tpd (ns) Nr of bits Power dissipation considerations Tamb (°C) Package name
74LVC2T45GT-Q100 1.2 - 5.5 1.2 - 5.5 CMOS/LVTTL ± 24 2.5 2 low -40~125 XSON8

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74LVC2T45GT-Q100 74LVC2T45GT-Q100X
(935690702115)
Active V45 SOT833-1
XSON8
(SOT833-1)
SOT833-1 SOT833-1_115

Environmental information

Type number Orderable part number Chemical content RoHS RHF-indicator
74LVC2T45GT-Q100 74LVC2T45GT-Q100X 74LVC2T45GT-Q100 rohs rhf rhf
Quality and reliability disclaimer

Documentation (10)

File name Title Type Date
74LVC_LVCH2T45_Q100 Dual supply translating transceiver; 3-state Data sheet 2023-08-09
Nexperia_document_guide_MiniLogic_MicroPak_201808 MicroPak leadless logic portfolio guide Brochure 2018-09-03
SOT833-1 3D model for products with SOT833-1 package Design support 2021-01-28
lvc2t45 lvc2t45 IBIS model IBIS model 2013-04-08
Nexperia_document_leaflet_Logic_Automotive_MicroPak_solutions_201904 Automotive logic in MicroPak leadless packages Leaflet 2019-04-18
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT833-1 plastic, leadless extremely thin small outline package; 8 terminals; 0.5 mm pitch; 1 mm x 1.95 mm x 0.5 mm body Package information 2022-06-03
SOT833-1_115 XSON8; Reel pack for SMD, 7''; Q1/T1 product orientation Packing information 2020-04-21
74LVC2T45GT-Q100_Nexperia_Product_Reliability 74LVC2T45GT-Q100 Nexperia Product Reliability Quality document 2024-06-16
MAR_SOT833 MAR_SOT833 Topmark Top marking 2013-06-03

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
lvc2t45 lvc2t45 IBIS model IBIS model 2013-04-08
SOT833-1 3D model for products with SOT833-1 package Design support 2021-01-28

PCB Symbol, Footprint and 3D Model

Model Name Description

Ordering, pricing & availability

Type number Orderable part number Ordering code (12NC) Status Packing Packing Quantity Buy online
74LVC2T45GT-Q100 74LVC2T45GT-Q100X 935690702115 Active SOT833-1_115 5,000 Order product

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74LVC2T45GT-Q100 74LVC2T45GT-Q100X 935690702115 SOT833-1 Order product