Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

NPIC6C596AD

Power logic 8-bit shift register; open-drain outputs

The NPIC6C596A is an 8-bit serial-in/serial or parallel-out shift register with a storage register and open-drain outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR resets both the shift register and storage register. Data is shifted on the LOW-to-HIGH transitions of the SHCP input. The data in the shift register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input. If both clocks are connected together, the shift register is always one clock pulse ahead of the storage register. To provide additional hold time in cascaded applications, the serial output QS7 is clocked out on the falling edge of SHCP. Data in the storage register drives the gate of the output extended-drain NMOS (EDNMOS) transistor whenever the output enable input (OE) is LOW. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers.

The open-drain outputs are 33 V/100 mA continuous current extended-drain NMOS transistors designed for use in systems that require moderate load power such as LEDs. Integrated voltage clamps in the outputs provide protection against inductive transients. These voltage clamps make the device suitable for power driver applications such as relays, solenoids and other low-current or medium-voltage loads.

This product has been discontinued

Features and benefits

  • Specified from -40 °C to +125 °C

  • Wide supply range 2.3 V to 5.5 V

  • Low RDSon

  • Eight Power EDNMOS transistor outputs of 100 mA continuous current

  • 250 mA current limit capability

  • Output clamping voltage 33 V

  • 30 mJ avalanche energy capability

  • Enhanced cascading for multiple stages

  • All registers cleared with single input

  • Low power consumption

  • ESD protection:

    • HBM JDS-001 Class 2 exceeds 2500 V

    • CDM JESD22-C101E exceeds 1000 V

Applications

  • LED sign

  • Graphic status panel

  • Fault status indicator

Parametrics

Type number Package name
NPIC6C596AD SO16

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
NPIC6C596AD NPIC6C596ADJ
(935302408118)
Discontinued / End-of-life NPIC6C596AD SOT109-1
SO16
(SOT109-1)
SOT109-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
SOT109-1_118

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
NPIC6C596AD NPIC6C596ADJ NPIC6C596AD rohs rhf rhf
Quality and reliability disclaimer

Documentation (12)

File name Title Type Date
NPIC6C596A Power logic 8-bit shift register; open-drain outputs Data sheet 2020-06-26
AN11537 Pin FMEA for NPIC Family Application note 2019-10-07
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22
npic6c596a NPIC6C596A IBIS model IBIS model 2016-05-30
Nexperia_document_leaflet_Logic_NPIC_ShiftRegisters_201906 NPIC Logic Shift Registers Leaflet 2019-07-12
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SO16_SOT109-1_mk plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.35 mm body Marcom graphics 2017-01-28
SOT109-1 plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.75 mm body Package information 2023-11-07
NPIC6C596AD_Nexperia_Product_Reliability NPIC6C596AD Nexperia Product Reliability Quality document 2022-05-04
SO-SOJ-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
npic6c596a NPIC6C596A IBIS model IBIS model 2016-05-30
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.