Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

IP4359CX4

Dual channel low capacitance high performance ESD protection

The IP4359CX4 is a dual channel low capacitance ElectroStatic Discharge (ESD) protection device, providing protection to downstream components from ESD voltages as high as ±15 kV contact discharge and > ±15 kV air discharge according the IEC 61000-4-2 model, far exceeding standard level 4.

The device is optimized for protection of high speed interfaces such as Universal Serial Bus (USB) 2.0, High Definition Multimedia Interface (HDMI), Digital Visual Interface (DVI) and other interfaces requiring very low capacitance ESD protection.

The device is available in two different heights. 0.61 mm and reduced maximum height of 0.5 mm. Both versions contain identical circuits and show an identical electrical performance. Both ESD protection channels share common ground connections, but are electrically separated, thereby preventing current back drive into the adjacent channel. IP4359CX4 is fabricated using monolithic silicon technology in a single Wafer-Level Chip-Scale Package (WLCSP). These features make the IP4359CX4 ideal for use in applications requiring component miniaturization such as mobile phone handsets and other portable electronic devices.

This product has been discontinued

Features and benefits

  • Pb-free, RoHS compliant and free of halogen and antimony (Dark Green compliant)
  • 2 ultra low input capacity rail-to-rail ESD protection diodes with C(I/O-GND) = 1.3 pF
  • Rdyn = 0.45 Ω
  • Integrated ESD protection withstanding ±15 kV contact discharge and > ±15 kV air discharge, far exceeding IEC 61000-4-2 level 4
  • Standard height version (0.61 mm) available as IP4359CX4/LF
  • Reduced height version (maximum height of 0.5 mm) available as IP4359CX4/LF-H500
  • 2 × 2 solder ball WLCSP with 0.4 mm pitch

Applications

  • High-speed interface ESD protection such as USB 2.0, HDMI, DVI etc.
  • Interfaces with special requirements on low capacitive ESD protection
  • Interfaces requiring separation of the positive clamping voltage/current path

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
IP4359CX4 IP4359CX4/LF,115
(934060057115)
Obsolete no package information
IP4359CX4/LF,135
(934060057135)
Obsolete

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
IP4359CX4 IP4359CX4/LF,115 IP4359CX4 rohs rhf rhf
IP4359CX4 IP4359CX4/LF,135 IP4359CX4 rohs rhf rhf
Quality and reliability disclaimer

Documentation (4)

File name Title Type Date
IP4359CX4 Dual channel low capacitance high performance ESD protection Data sheet 2010-08-06
AN10910 Protecting charger interfaces and typical battery charging topologies with external bypass transistors Application note 2021-04-12
nexperia_document_leaflet_WLCSP_201803_CHN WLCSP Chinese Translation Leaflet 2018-04-25
R_10001 Guideline for the laser marking layout of WLCSP devices Report 2021-01-05

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.