Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)

74ALVC162835A

18-bit registered driver with 30 Ohm termination resistors; 3-state

The 74ALVC162835A is an 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).

When LE is HIGH, the A to Y data flow is transparent. When LE is LOW and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A‑data is stored in the latch/flip‑flop.

The 74ALVC162835A is designed with 30 Ω series resistors in both HIGH or LOW output stages.

When OE is LOW the outputs are active. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latch/flip‑flop.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Features and benefits

  • Wide supply voltage range of 1.2 V to 3.6 V
  • Complies with JEDEC standard no. 8-1A
  • CMOS low power consumption
  • Direct interface with TTL levels
  • Current drive ±12 mA at 3.0 V
  • MULTIBYTETM flow-through standard pin-out architecture
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce
  • Output drive capability 50 Ω transmission lines @ 85 °C
  • Integrated 30 Ω termination resistors
  • Diode clamps to VCC and GND on all inputs
  • Input diodes to accommodate strong drivers

Applications

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVC162835ADGG 74ALVC162835ADGG,1
(935267300112)
Obsolete no package information
74ALVC162835ADGG:1
(935267300118)
Obsolete

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVC162835ADGG 74ALVC162835ADGG,1 74ALVC162835ADGG rohs rhf rhf
74ALVC162835ADGG 74ALVC162835ADGG:1 74ALVC162835ADGG rohs rhf rhf
Quality and reliability disclaimer

Documentation (1)

File name Title Type Date
74ALVC162835A 18-bit registered driver with 30 Ohm termination resistors; 3-state Data sheet 2017-10-12

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

No documents available

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.